Shanghai Clirik is a company specializing in the production of ore micronizer equipment manufacturers, whose micronizer is mainly suitable for the middle and low hardness, non flammable and explosive of mohs hardness level 6 or less brittle material of ultrafine powder processing, such as calcite, chalk, limestone, dolomite, carbon black, kaolin, talc, mica, bentonite, magnesite, illite and pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum stone, graphite, fluorite, phosphate rock, potassium ore, pumice, etc. more than 100 kinds of materials.
When micronizer is working, host motor through the gear reducer drives shaft and rotate, roller pin on the edge of the rotary table drive dozens of roller in the roll of ring rolling. Large pieces of material is broken into small particles by the hammer crusher into the storage bin by elevator, after vibration feeder, and the oblique feeding tube, the material evenly on the dispersing materials plate to the top of the table. The material under the action of centrifugal force on the circle around, and fall into the inside of the ring raceway ring impact roller, rolling, grinding, through three layers of the ring processing into powder, high pressure fan through the suction effect to outside air suction machine, and the material into the powder concentrator after crushing. Inside the classifier rotating impeller grinding coarse material back, conform to the requirements of the powder increases with airflow into the cyclone powder and the lower part of the discharge valve discharge is the finished product, whereas with a small amount of fine dust in the air after impulse precipitator purification by fan and muffler.
