The milling production line is a project with complex technology and large investment. Affected by various factors, the milling production line sometimes becomes blocked, which affects the smooth and stable operation of milling operations to a large extent.
So, what are the reasons? （The treatment method for the blockage of the milling equipment.）
1. The material size is too large. In the milling production line, the inlet of each type of milling equipment is equipped with corresponding feeding requirements. If the particle size of the material is too large and exceeds the requirements of the feeding device, a jam will occur The phenomenon of material blockage affects the smooth progress of the next process of the grinding operation;
2. Improper operation method. In order to increase the output of the milling production line, some users feed the equipment too fast and the feed amount is too large. In the case of uneven feeding, it is easy to cause the milling equipment to fail to keep up with the material processing capacity. Increase the feeding speed, so that a large amount of materials accumulate in the grinding cavity, increasing the difficulty of the grinding production line, and it will inevitably cause blockage after a long time;
3. The blade is severely worn. In the production of grinding powder, the main function of the shovel is to scoop up the material, and then project it between the grinding roller and grinding ring through a set angle. In this process, the shovel is a component that directly contacts the material. If the shovel is severely worn, it will not be able to shovel and throw the material better, which will result in a large amount of material that cannot be sufficiently ground, which will cause a blockage;
4. The grinding ring of the grinding roller is severely worn. When the equipment is under high load operation for a long time, it is inevitable that the grinding roller and grinding ring will have different degrees of wear. Once the grinding roller and grinding ring are severely worn, the production capacity of the mill will be greatly reduced, resulting in grinding. The occurrence of blockage on the production line.
Since ancient times, the market has always been the survival of the fittest, and the manufacturers of milling equipment are also the same. It is the best return to the manufacturers to obtain the recognition of powder users through their own strength, and it is also the driving force for the manufacturers to move forward. Competition, continuous innovation of technology, strengthening of milling equipment and technology, and continuous adjustments in the powder market.
Continuously adapting the machine to the current market demand, and the user's powder needs are different, Shanghai Clirik Machinery Co., Ltd. will consider the problem according to the specific various reasons, and develop a good plan for it for customers to choose and refer to.
With the gradual maturity and strict requirements of the mining machinery market, the competition model of enterprise development has also changed. From the original price, product quality, and technology competition, it has gradually entered the era of after-sales service competition. Shanghai Clirik Machinery Co., Ltd. stands out.
The company attaches great importance to customer service work. In the early stage of contact, the company will figure out the hardness of the processed ore, the fineness of the ore feed, the required fineness of the finished product and the output according to the actual needs of the user, and specify the entire production line process for the user according to the user's investment situation , To ensure that users can use low investment in exchange for high economic benefits; during equipment installation and commissioning, on-site training of technical personnel for users, assisting users in drawing up construction plans, on-site training of operators, in the later equipment operation process, the company will send full-time technology The personnel assist the customer in production until the customer can operate normally.
