Micronizer is for super-fine grinding materials with hardness less than 6 in Moh‘s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds. The granularity (or final size) of the finished products can be freely adjusted between 325-3000meshes (0.045-0.0057mm), and the capacity (ton/hour) ranges from 0.4T/H to 12T/H depending on the final size and the grinding materials.
Microzer mill mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.
When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.
The high-pressure air blower constantly inhales air within the grinding mill and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
Technical Data of Illite Micronizer
|Main Shaft Speed(r.p.m.)||230～240||200～220||180～200||135～155|
|Outlet Size (L*W*H, m)||13.9*4*6.2||14.7*4.8*7.2||18*4.6*8.6||14*9*10.25|
Note: This specification is just referencing, any changes are subject to the products.
Shanghai clirik machinery co., LTD.
Should you have any questions on our stone mills; stone grinding machine; stone grinder; stone processing machine; stone milling machine; stone pulverizer; stone mill equipment; stone pulverizing machine; stone powder machine; stone grinding plant.please do not hesitate to contact us.
Phone: 4008-168-355; 0086-21-20236178;86-18918057603
Contact person: Esther Wang
Email: email@example.com ;
Online consulting: http://www.stone-mills.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.