Product Introduction
The application of hammer crusher:
Hammer crusher is the equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds.
The Working principle of Hammer Crusher:
Hammer Crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors.
Large materials entering the Hammer crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.
The Advantages and Features of Hammer Crusher:
1.high capacity, high crushing ratio
2.uniform particle size, simple structure
3.Low investment, easy management and maintenance.
Technical Data of Hammer crusher:
|
Model
|
PC400x300
|
PC600x400
|
PC800x600
|
|
Rotor diameter /mm
|
400
|
600
|
800
|
|
Rotor length /mm
|
300
|
400
|
600
|
|
Rotor speed r/min
|
1100
|
1000
|
900
|
|
Max. feeding size /mm
|
<100
|
<220
|
<350
|
|
Ouput size /mm
|
5-10
|
5-15
|
5-20
|
|
Capacity T/h
|
5-13
|
10-20
|
18-30
|
|
Motor power /KW
|
11
|
18.5
|
45
|
|
Number of hammer /piece
|
16
|
20
|
28
|
|
Weight /T
|
0.8
|
1.8
|
2.8
|
|
Overall dimension L*W*H/mm
|
900*670*860
|
1200*1050*1200
|
2360*1490*1415
|
Note: This specification is just referencing, any changes are subject to the products.
Shanghai clirik machinery co., LTD.
Phone: 0086-21-20236178;86-18918057603
Contact person: Esther wang
Email: clirik-esther@clirik.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
Phone: 0086-21-20236178;86-18918057603
Contact person: Esther wang
Email: clirik-esther@clirik.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
